Description; Design Of The Protective Suit - MSA Vautex Elite ET Trainer Manual Del Usuario

MSA
2.

Description

2.1.

Design of the Protective Suit

5
Design of the Protective Suit
Fig 1
1 Suit shell
2 Head strap (on the inside of the suit)
3 Lens
4 Suit valves (2 pieces)
The one-piece suit is made of a special compound material with a pressure-tight zip protected
by a zip cover. The zip runs vertically on the front from the right leg up to the head part. The
lens is fitted fluid-tight. The protective gloves and safety high boots can be replaced and fitted
as liquid-tight.
GB
1
2
3
5 Gloves
6 Rucksack
7 Safety high boot (PVC)
Vautex Elite ET Trainer
DESCRIPTION
4
6
7
5