Multimetrix DMM 107 Manual De Instrucciones página 25

Item Function
1. Black negative (-) COM terminal
Positive 10 A terminal
Positive mA and temperature terminal
2. Liquid crystal display: 4,000 counts
3. RANGE key. See Paragraph 7.14.
4. FUNC. key toggles between:
V, 400mA and A: changes from AC to DC.
5. LIGHT key: activates display backlighting. The backlight
automatically turns off after approximately 10 seconds.
6. REL key: calculates the difference between two
measurements (see Paragraph 7.16)
7. Hz% key toggles between:
V, 400 mA: changes from V to Hz and then to %
Hz:
8. Function switch for:
OFF:
V:
Ohms:
Hz:
° C:
1° C
° C:
0.1° C
%RH:
dB:
Lux:
Lux:
X10
400 mA:
10 A:
9. HOLD key. Freezes the reading. See Paragraph 7.12.
10.
Red positive terminal (+)
All manuals and user guides at all-guides.com
changes function: ohm, diodes,
continuity, capacitance
changes from Hz to %
Multimeter is without power.
AC/DC frequency and voltage
Resistance, diode, continuity and
capacitance measurements
Frequency and cyclic ratio measurements
Temperature measurements
Temperature measurements
Relative humidity measurements
Sound level measurements
Low-level illuminance measurements
High-level illuminance measurements
Current measurements (with fuse)
Current measurements (without fuse)
25