Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Special Socket
for Camshaft Control Valve,
to be used as OEM T10352/1
2
Special Socket
for Camshaft Control Valve,
to be used as OEM T10352
3
Special Socket
for Camshaft Control Valve,
to be used as OEM T10352/2
INTENDED USE
The tools in this set are required for disassembling / assembling of the 4- or 3-way central valve for
camshaft adjustment. The tools are suitable for 1.8 & 2.0 liter 4-cylinder injection or direct injection
engines with timing chain built in models from Audi, Volkswagen, Seat and Skoda.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Camshaft Central Valve Sockets
for VAG 1.8 / 2.0 TFSi / TSI
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9064
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
