Uline SCOUT H-9560 Manual Del Usuario página 11

AUTO OFF
Sets the automatic shutoff functionality.
• Off = Disabled
• 1 = Powers off after one minute of no activity.
• 5 = Powers off after five minutes of no activity.
• 10 = Powers off after 10 minutes of no activity.
END SETUP
Advances to the next menu or return to top of current
menu.
MODE MENU
THIS MENU ACTIVATES MODES SO THEY WILL BE
AVAILABLE FOR USE WITH THE MODE BUTTON.
Reset
Weigh
Count
Percent
Check
Totalization
Density
Hold
End Mode
RESET [rESEt]
Reset the Mode menu to factory defaults.
• No = Not reset
• Yes = Reset
WEIGH [WEIGH]
Set the status.
• Off = Disabled
• On = Enabled
COUNT [Count]
Set the status.
• Off = Disabled
• On = Enabled
PAGE 11 OF 53
MENU SETTINGS CONTINUED
No, Yes
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Disp, Peak, Off
Exit Menu
PERCENT [PErcnt]
Set the status.
• Off = Disabled
• On = Enabled
CHECK [CHECk]
Set the status.
• Off = Disabled
• On = Enabled
TOTALIZATION [totAL]
Set the status.
• Off = Disabled
• On = Enabled
DENSITY [SPEC.Gr]
Set the status.
• Off = Disabled
• On = Enabled
HOLD [HoLd]
Set the sub-mode.
• Off = Disabled
• Peak Hold = Allows the user to capture and store the
highest stable weight value (>=5d).
• Display Hold = Allows the user to capture and store
the first stable weight value (>=5d).
When the stable value is being held on the display,
the "Hold" icon will blink and the displayed weight will
not change. Advance to the next menu or return to the
top of the current menu.
1021 IH-9560