Worx WT525 Manual Del Usuario página 4

8) Do not reach underneath the work-piece while cutting.The guard cannot protect you
from the blade below the work-piece.
9) Your circular saw is a hand-held tool, do not clamp your circular saw.
10) Before cutting, check the cutting line is free of nails, screws, etc.
11) Do not cut small work-pieces with a circular saw. If possible, use a jigsaw.
12) Only use blades that the rated speed exceeds the saw no load speed.
13) Never remove the guard system. Never use the saw if the guard system does not func-
tion correctly. Never lock the moving guard open.The guard must move freely.
14) ALWAYS check lower guard to ensure proper closing before each use. Do not op-
erate saw if lower guard does not move freely and close instantly. Never clamp or
tie the lower guard in the open position. If saw is accidentally dropped, lower guard may be
bent. Raise the lower guard with the Lower Guard Lever and make sure guard moves freely
and does not touch the blade or any other part of the saw, in any angle and depth of cut.
15) Always check walls, floors and ceilings to avoid hidden power cable and pipes.
16) Do not cut material containing asbestos.
17) Do not use metal or stone saw blades. Only use wood saw blades.
18) Do not use circular saw to cut tree limbs or logs.
19) Do not use any abrasive wheels.
20) Keep your body positioned to either side of the saw, but not in-line with the saw
blade. KICKBACK could cause the saw to jump backwards.
21) Be aware that this tool is always in an operating condition because it does not
have to be plugged into an electrical outlet.
22) Disconnect battery pack from the tool or place switch in the "LOCKED" or "OFF"
position before making any assembly, adjustments or changing accessories. Such
preventive safety measures reduce the risk of starting the tool accidentally.
23) Save these instructions. Refer to them frequently and use them to instruct others who
may use this tool. If someone borrows this tool, make sure they have these instructions.
04
WARNING! Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemical are:
• Lead from lead-based paint
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically-treated lumber
Your risk to these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals:
• Work in a well ventilated area
• Work with approved safety equipment, such as those dust masks that are specifically designed to
filter out microscopic particles.
BATTERY / CHARGER
1. Do not dispose of batteries in fire, or with household waste. Return exhausted batter-
ies to your local collection or recycling point.
2. Before using battery charger, read all instructions and cautionary markings on (1)
battery charger, (2) battery pack, and (3) product using battery.
3. CAUTION: To reduce the risk of injury, a WORX charger should only be used to
charge a WORX battery pack. Other types of batteries may burst causing personal injury
and damage. Do not charge a WORX battery pack with any other charger.
4. Do not store the battery pack in temperatures over +102ºF (39ºC).
Cordless Circular Saw
NA-WT525-M-050727.indd 4
All manuals and user guides at all-guides.com
WT525
2005-7-27 17:45:58