Wiseup C9000 Guia Del Usuario página 4

glow solid blue, indicating the camera has entered into standby mode
automatically.
3.4.2. Press the Audio Recording Button once to record audio. The indicator light
will flash blue twice slowly and then turn off.
3.4.3. Press the Audio Recording Button once again to stop recording audio. The
indicator light will glow solid blue, indicating the camera is back to standby
mode.
[Note]:
1). An audio file will be generated and saved every 20 minutes automatically.
2). Audio Format: WAV
3.5. MOTION DETECTION RECORDING
3.5.1. Slide the Power Switch to the ON position. Power on the camera by
pressing the Power Button on remote controller once. The indicator light will
glow solid blue, indicating the camera has entered into standby mode
automatically.°
3.5.2. Press the Motion Detection Recording Button once to enter into motion
detection recording mode. The indicator light will flash blue 3 times slowly and
then turn off. The camera will record video automatically when a movement is
detected.
3.5.3. Press the Motion Detection Recording Button once again to exit motion
detection recording mode. The indicator light will glow solid blue, indicating the
camera is back to standby mode.
[Note]:
A video file will be generated and saved every 3 minutes automatically.
IV. Video/Image Files Uploads
4.1. Power off the clock camera, remove the Micro SD card and insert it into a
card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.