Setup 2: Connect The Audio Cord; Setup 3:Connect The Power Cord - Sony SDM-X53 Manual Del Usuario

x Connecting to a Macintosh
to the computer's
output connector
Macintosh
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.

Setup 2: Connect the audio cord

Connect the supplied audio cord to the monitor's
corresponding audio input jack.
Using the monitor's speakers or headphones, you can listen to
sound from your computer or other audio equipment connected to
the monitor's audio input jacks.
For more information, see "Controlling the volume" on page 18.
to the audio input
to audio output of the
computer or other
audio equipment
audio cord (supplied)
8
to the HD 15 input
connector (analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)

Setup 3:Connect the power cord

1 Connect the supplied power cord securely to the
monitor's AC IN connector.
2 Connect the other end securely to a power outlet.
to power outlet
2
power cord (supplied)
1
to AC IN