HSM Classic 105.3 Instrucciones De Servicio página 12

6 Troubleshooting
Paper jam
You have fed in too much paper.
Notice Do not press rocker switch al-
ternately forwards/backwards ( - ). Cut-
ting unit could be damaged.
• Press rocker switch .
 Pa per is pus hed out.
• Se pa ra te pa per stack.
• Press rocker switch .
• Feed in pa per successively.
Shredded material container full
 Red LED lights.
 Paper shredder switches off.
Notice Empty the cut material contain-
er, immediately because if it is too full, mal-
functions can occur in the cutting system.
• Switch equipment off. To do this
tap rocker switch .
• Empty cut material container.
Shredded material container open
 Red LED lights.
 Paper shredder switches off.
• Check whether shredded mate-
rial container is correctly inserted
in bottom frame.
12
All manuals and user guides at all-guides.com
For all other malfunctions, before calling
customer service please check
– if the motor was overloaded
Let the shredder cool down for approx.
15 – 20 mins. before using it again.
– if the light barrier is soiled with paper
dust.
Clean the light barrier in the paper feed
using a dry brush or cloth.
Classic 105.3
english
01/2014