Intended Use; Safety Informations - BGS technic 8303 Manual De Instrucciones

Engine Timing Tool Set for Opel 1.0, 1.2, 1.4L
TOOLS
1 Setting gauge for phase encoder disc, to be used as OEM KM-954
2 Chain tensioner retaining pin Ø 4 mm, to be used as OEM KM-955-2
3 Chain tensioner retaining pin Ø 2.5 mm, to be used as OEM KM-955-1
4 Crankshaft adjusting pin, to be used as OEM KM-952
5 Camshaft ruler, to be used as OEM KM-953
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This tool set is used to check and adjust the engine timing on following vehicles (1997-2007).
Model
Agila
Corsa B
Astra G/H
Corsa Combo C
Meriva
Tigra B
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

• Keep children and other persons away from the working area.
Do not allow children to play with this tool or its packaging.
•
• Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine
1.0L 12V / 1.2L 16V
1.0L 12V / 1.2L 16V
1.2L 16V / 1.4L 16V
1.0L 12V / 1.2L 16V / 1.4L 16V
1.4L 16V
1.4L 16V
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Engine Code
Z10XE / Z12XE / Z10XEP / Z12XEP
X10XE / X12XE
X12XE / Z14XEL / Z14XEP
X10XEP / X12XEP / Z14XEP
Z14XEP
Z14XEP
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8303