Setting Reminder Alarms (Optional); Purpose; Transferring Test Results To A Computer - Freestyle Lite Manual Del Usuario

Setting Reminder Alarms (optional)

Purpose

The purpose of this section is to set up to four reminder alarms to prompt you to test throughout
the day.
1.
With the meter off, press and hold
and 0 is flashing.
2.
c . Reminder alarm 1 flashes.
Press
Reminder Alarm
Note: You are setting time for Reminder Alarm not clock time.
3.
Set hour
•
m
Press to set hour
•
c
Press to display correct hour
Hour
•
Press m to save
4.
Set minutes
•
c
Press to display correct minutes
•
m
Press to save
Minutes
31
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
ART22813-003_rev-A.indd 31-32
All manuals and user guides at all-guides.com
m
for 3 seconds until appears

Transferring Test Results To a Computer

Contact Customer Care to learn more about the data management system.
5.
Set alarm sound volume
c
If you prefer:
Press until you see:
No sound
A low beep
A louder beep
6.
c
Press and repeat 2, 3, 4 and 5 to set remaining reminder alarms or
7.
m
for 3 seconds until meter turns off.
Press and hold
appears on the display when you insert a data cable in the data port. The computer
must have a compatible data management system to complete the transfer. Remove
this cable before performing a test.
Then
•
m
Press to save
32
11/9/16 1:29 PM