Endress+Hauser Proservo NMS81 Manual De Instrucciones página 291

Proservo NMS81
Low stop level
Navegación
Descripción
Entrada de usuario
Información adicional
Slow hoist zone
Navegación
Descripción
Entrada de usuario
Información adicional
Overtension weight
Navegación
Descripción
Entrada de usuario
Información adicional
Undertension weight
Navegación
Descripción
Entrada de usuario
Endress+Hauser
 Setup → Advanced setup → Safety settings → Low stop level
Position of the displacer low stop as measured from defined zero position (tank bottom or
datum plate).
–999 999,9 ... 999 999,9 mm
Acceso de lectura
Acceso de escritura
 Setup → Advanced setup → Safety settings → Slow hoist zone
Defines the interval in millimeters, measured down from the Reference Position, in which
the Displacer reduces moving speed.
10 ... 999 999,9 mm
Acceso de lectura
Acceso de escritura
 Setup → Advanced setup → Safety settings → Overtension wgt
Sets the minimum Weight in grams when Overtension Alarm will be set.
100 ... 999,9 g
Acceso de lectura
Acceso de escritura
 Setup → Advanced setup → Safety settings → Undertension wgt
Defines the undertension error weight. Untertension error will be issued if displacer
weight is below this value longer than 7 seconds.
0 ... 300 g
Operator
Maintenance
Operator
Maintenance
Operator
Maintenance
Menú de configuración




291