ELECTRICAL CONNECTION
Before connecting the appliance to the mains,
make sure that:
• the characteristics of the electrical system
satisfy what is shown on the serial number
plate applied to the front of the oven;
• the system has an effective earth connec-
tion, compliant with current standards and
laws.
The earth connection is required by law.
The cable must not, at any point, reach
a temperature greater than 50°C above the
ambient temperature.
This oven must be connected to the mains
through a power supply cable and plug that
is compatible with the outlet of the electrical
system that powers this oven.
If a fixed appliance does not have a power cord
and plug, or another device that ensures discon-
nection from the mains with a contact opening
distance that allows for complete disconnec-
tion under the conditions of excessive voltage
category III, such disconnection devices must
be provided by the mains power supply and
must conform to the installation rules.
The omnipolar socket or switch must be easy to
reach when the appliance is installed.
NOTE: The manufacturer declines all liability if
the usual accident prevention standards and
the above instructions are not followed.
TYPE AND MINIMUM DIAMETER
OF THE CABLES
H05RR-F
3x1.5 mm²
H05VV-F
3x1.5 mm²
H05RN-F
3x1.5 mm²
H05V2V2-F
3x1.5 mm²
EN 39
SASO
H05RR-F
3x2.5 mm²
H05VV-F
3x2.5 mm²
H05RN-F
3x2.5 mm²
H05V2V2-F
3x2.5 mm²