Technical Data; Table I: Technical Data Of Electric Heated Bain-Maries Minima Series; Installation Instructions; Data Plate For Electric Heated Bain-Maries Minima Series - MBM MINIMA Serie Instrucciones Para La Instalación, El Uso Y El Mantenimiento

1.
1.1

TABLE I: TECHNICAL DATA OF ELECTRIC HEATED BAIN-MARIES MINIMA SERIES

MODEL
W x D x H/H max.
EBM46 400 x 600 x 270/420
EBM66
600 x 600 x 270/420
*Feeding Power: 1N 240 V 50/60 HZ
N.B.: the absorbed power with 1N 220 V 50/60 HZ is around 16% lower.
2.
Installation must be performed by qualified technicians according to the law in force.
WARNINGS:
Should the unit be installed against a wall, the latter must be heat-resistant to temperatures of 100°C and must be fireproof;
otherwise, the application of a lagging material shall be absolutely necessary.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
The equipment can be separately installed or joined to other equipment belonging to the same range.
This equipment is not suitable for embedding.
2.1

DATA PLATE FOR ELECTRIC HEATED BAIN-MARIES MINIMA SERIES

The technical data plate is located on the back of the equipment.
V
2.2

LAWS, REGULATIONS AND TECHNICAL DIRECTIVES

The following indications should be observed during installation:
- Accident and fire regulations in force
- The regulations of the electric power supply company.
- Hygienic regulations.
- The rules for electrical systems.
DIMENSIONS IN mm.
ESTERNAL
Ltr.
305 x 425 x 170
2,5
3,5 510 x 470 x 170
KW
ABSORBED
ELECTRIC*
TANK
POWER
L x P x A
kw
1,53
3,06

INSTALLATION INSTRUCTIONS

Mod.
Matr. N°
- 9 -

TECHNICAL DATA

NET
WEIGHT
kg.
22
30
HZ
Tab. 1
GB