Others; About White-Spot Correction - JVC TK-C205VP Instrucciones

Others

About White-spot correction

As a general characteristic unique to CCDs, white-spots may appear on the screen with age.
About White-spot correction
In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature.
MEMO
• The white-spot correction feature of this unit does not guarantee the correction of all
white spots.
Maximum correction: less than 16 - 32 spots
Depending on the characteristic of white spots, correction may not be possible.
• When performing white-spot correction, accurate data may not be achieved in case of
highly-detailed pixels since correction is made using the information of surrounding
pixels.
• The result of white-spot correction is maintained until the next correction is performed.
Usage
Switch on the camera power supply and wait
for at least 30 minutes.
1.
Remove the dome cover.
2.
Cover the lens surface using a black
sheet of paper, etc. so that light does
not enter the lens.
3.
Press and hold the SPOT CORRECTION
button on the unit for more than 2
seconds.
• White-spot correction will star t.
Correction may take several seconds
for completion.
E-19