Installation And Connection System Diagram; Installing The Camera - JVC TK-C205VP Instrucciones

Installation and connection
System diagram
Camera 1
Video signal
Power
Camera 2
Video signal
Power
Camera 3 Video signal
Power
Video signal
Camera 4
Power
Power Unit
DC 12 V or AC 24 V
• Turn OFF the power supply to all equipment to be used before making connections.
• Read the Instruction Manual for each piece of equipment to be used before making
connections.

Installing the camera

Install the camera to the ceiling by following the procedure below
• Mounting the base ................................................................................................. 10-11
=
• Connect the Cables to the Base ................................................................................ 12
=
• Mount the Camera unit to the Base ........................................................................... 13
• Fill using sealing agent
• Insert the included Silica gel
=
• Before Adjusting the Camera ..................................................................................... 14
=
• Adjusting the Lens and Camera Angle ...................................................................... 14
=
• Attach the Dome cover ............................................................................................... 15
When Installing the Camera Using the Conduit Hole (side) ........................................ 16
When Installing the Camera Using the Electrical Box .................................................. 17
When installing the camera to a ceiling without piping ................................................ 18
VIDEO
INPUT
TO CAMERA TO CAMERA DATA I / O DATA I / O
RX+ RX RX RX- TX TX+ TX TX- COM COM 1 2 3 4 5 6 7 8 COM COM 9/1 9/1 10/2 10/2 11/3 11/3 12/4 12/4 13/5 13/5 14/6 14/6 15/7 15/7 16/8 16/8 COM
POWER
ON OFF
VIDEO INPUT VIDEO INPUT
1 2 3 4 5
AC INPUT
1 2 3 4 5 6 7 8
1 2 3 4 5
ON ON
VIDEO OUTPUT VIDEO OUTPUT
Switcher, etc.
MEMO
Power supply necessary for one TK-C205VP
DC 12V : 300mA
AC 24V : 280mA When using KA-H205U
• When the voltage drops due to fluctua-
tions in voltage or compatibility with the
power supply cable, the current increases
by 30% for each TK-C205VP.
HDR, VTR, etc.
REC STOP/EJECT REC
CHECK
PAUSE/
REVERSE STILL PLAY
REW FF
UNIT UNIT CAMERA CAMERA SERIAL-1 SERIAL-1 SERIAL-2 SERIAL-2
COM AUTO AUTO ALARM ALARM COM COM SW SW COM COM
MONITOR
OUTPUT 2
6 7 8
MONITOR MONITOR MONITOR MONITOR
OUTPUT OUTPUT OUTPUT OUTPUT
1 2
6 7 8
MONITOR
OUTPUT 1
19.2W : U type only
MONITOR
SR-L910E
OPERATE
VIDEO CASSETTE RECORDER
OPE. LOCK
COUNT/ SHIFT/TRACKING
RESET
CLOCK MENU /CANCEL
TIME TIMER SET/V.LOCK AL/PL
MODE REC RESET
VIDEO IN
MONITOR
E-9