Operating Your Icemaker; Ice Size Adjustment Guide; Operating Your Appliance - Avanti IM44U3S Manual De Instrucciones

Description of LEDs and buttons:
1. Bin Full (Red) LED: Bin full indicator light
When this is lit, the ice storage bin is full of ice or there is something blocking the bin-full probe.
The unit will stop working. When ice cubes are removed from the ice storage bin, freeing the bin-
full probe, the red LED will remain flashing for 3 minutes, then the unit will restart and return to
the ice making mode.
2. Ice Making(Green) LED: Ice making indicator light
When this is lit, the unit is working in the ice making mode controlled by a temperature probe on
the evaporator. When the green LED flashes, the unit is working in the ice making mode
controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice harvest indicator light
When this is lit, the unit is working in the ice harvest mode controlled by the ice-full probe.
4. Mode button: Mainly for service. When this is pressed, the ice making mode changes to the ice
harvest mode or vice versa. The mode can be judged from the status of the green and yellow
LEDs.
5. Adjust button: Mainly for service. When it is pressed over 3 seconds, the unit will enter the Ice
Size Adjustment mode. The mode can be judged from the status of the yellow LED.

Ice Size Adjustment Guide:

1. Press and hold the "Adjust" button for at least 3 seconds. The unit will enter the Ice Size
Adjustment mode. The "HARVEST" LED (yellow) will be blinking continuously during the ice size
adjustment. Release the button when the LED blinks continuously to adjust the ice size.
2. While in the Ice Size Adjustment mode, press the "Clean" (-) button or the "Mode" (+) button for
the desired ice size.

OPERATING YOUR ICEMAKER

_
+
12