Troubleshooting - Eneo VKC-1356-1/IR Instrucciones De Manejo

6. Troubleshooting

If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve
the problem, contact an authorized technician.
Problem
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface
of the camera is hot.
The image on the screen flickers. • Is the camera facing to fluorescent lighting ?
Solutions
• Check that the power cord and line connection between the camera and
the monitor are fixed properly
• Check that you have properly connected VIDEO cable to the camera VIDEO
output jack.
• Is lens stained with dirt ? Clean your lens with soft, clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change the camera position.
• Adjust the lens' focus properly.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75ohms/Hi-Z properly
(refer to page ).
• Adjust DC Level, properly by V.R. (refer to page 8).
• Check that you have properly connected the camera to an appropriate
power source (refer to page ).
Change the camera position.
3