Latch Belt Routing - Graco ComfortSPORT Manual De Instrucciones

OPERATIONS and ADJUSTMENTS
6
LATCH Belt Routing:
LATCH belt MUST be routed through
the proper openings depending on direction
of child restraint use.
A Remove pad from front of seat area by
pulling out 2-button clips on lower front
edge of child restraint (fig. a) and
2-button clip in center of seat.
Removing pad will expose the rotating
LATCH belt. (fig. b)
B Rotate LATCH
through the proper openings (Pg 29,
fig. d and fig. e). Belts must remain flat
and tight against the child restraint
BEFORE reattaching the seat pad
2-button clips.
not interfere with the harness. (fig. c)
C Re-attach pad to child restraint by
snapping the 2-button clips back in
place. DO NOT allow 2-button clip to
interfere with the
seat belt.
28
belt so that the belt routes
LATCH belt must
LATCH belt or vehicle
(continued)
(fig. a)
Rotating LATCH Belt
(under seat pad)
Belt must be
flat and tight
(fig. c)
(fig. b)