Sony ICD-UX71 Guia De Inicio Rapido página 19

When you are using Windows®
000 Professional
Install the driver using "SonyRecorder_
Driver.exe" in the IC recorder.
Connecting the IC recorder
to your computer
You can transfer the IC recorder data
onto your computer by connecting the
IC recorder to the computer.
Remove the USB cap from the IC recorder
and then connect the IC recorder to the
USB connector of your computer.
The IC recorder is recognized by the
computer as soon as the connection is
made. While the IC recorder is connected
to the computer, "CONNECTING" is
displayed in the display window of the
IC recorder.
IC recorder
To USB connector
Tip

If the IC recorder cannot be connected to the
USB connector of your computer directly, use
the supplied USB connection support cable.
Computer
USB connection
support cable
(supplied)
1
GB