Tabla de contenido
Publicidad
All manuals and user guides at all-guides.com
GB
ATTACHING THE MACHINE TO THE
TRACTOR
Read the Safety Instructions
The instructions in this book apply to Ford and Massey
Ferguson tractors. For fitting to other makes of
tractor, consult your authorised dealer for guidance.
Fig. 2
P.T.O. SHAFT
A standard P.T.O. shaft is provided and this will have
to be shortened in length to suit the tractor being used.
It is essential that no more than is necessary is cut off
as maximum engagement of the sliding portion is
needed to prevent excessive wear.
Adequate deburring and radiusing of the cut ends
must be carried out.
NOTE: On certain tractors it will be impossible to lift
the machine to the maximum height on the three point
linkage without the sliding part of the P.T.O. shaft
disengaging. Stops must be set correctly on the
tractor lift quadrant to limit the lift height to prevent the
disengagement of the P.T.O. shaft.
CHECK CHAINS
On Ford tractors a special external check chain (A Fig.
2) is supplied with the machine. On massey Ferguson
tractors the standard the standard check chain is
used.
GB-FR-NL-18
Publicidad
Tabla de contenido
