Safety Instructions; Safety Signs; Starting The Engine; Driving The Machine - Textron Jacobsen RANSOMES LH Serie Manual De Seguridad Y Operacion

Tabla de contenido

Publicidad

GB
This safety symbol indicates important safety
messages in this manual. When you see this symbol,
be alert to the possibility of injury, carefully read the
message that follows, and inform other operators.
NL
Dit veiligheidssymbool markeert belangrijke
veiligheidsinformatie in dit handboek. Als u dit symbool
ziet, moet u bedacht zijn op mogelijk letsel. Lees de
mededeling die er onder staat aandachtig door, en wijs
ook ander bedienend personeel op het gevaar.
FR
Ce symbole de sécurité indique des messages
importants de sécurité dans ce manuel. Lorsque vous
le voyez, faites preuve de la plus grande vigilance pour
éviter tout risque de blessure, lisez le message qui le
suit et prévenez les autres opérateurs.
GB-FR-NL-6
All manuals and user guides at all-guides.com
GB

SAFETY INSTRUCTIONS

OPERATING INSTRUCTIONS
Ensure that the instructions in this book are read and
fully understood.
No person should be allowed to operate this machine
unless they are fully acquainted with all the controls
and the safety procedures. Never allow children or
people unfamiliar with these instructions to use
this machine. Local regulations may restrict the age of
the operator.

SAFETY SIGNS

It is essential all safety labels are kept legible, if they
are missing or illegible they must be replaced. If any
part of the machine is replaced and it originally carried
a safety label, a new label must be affixed to the
replacement part. New safety labels are obtainable
from Ransomes dealers.

STARTING THE ENGINE

Before starting the engine check that the brakes are
applied, drives are in neutral, guards are in position
and intact, and bystanders are clear of the machine.
Do not run the engine in a building without adequate
ventilation.

DRIVING THE MACHINE

Before moving the machine, check to ensure that all
parts are in good working order, paying particular
attention to brakes, tyres, steering and the security of
cutting blades. Replace faulty silencers, mow only in
daylight or good artificial light.
Always observe the Highway Code both on and off the
roads. Keep alert and aware at all times. Watch out for
traffic when crossing or near roadways. Stop the
blades rotating before crossing surfaces other than
grass.
Remember that some people are deaf or blind and
that children and animals can be unpredictable.
Keep travelling speeds low enough for an emergency
stop to be effective and safe at all times, in any
conditions.
Remove or avoid obstructions in the area to be cut,
thus reducing the possibility of injury to yourself and/or
bystanders.
When reversing, take special care to ensure that the
area behind is clear of obstructions and/or bystanders.
DO NOT carry passengers.
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
When the machine is to be parked, stored or left
unattended, lower the cutting means unless the
transport locks are being used.

Publicidad

Tabla de contenido
loading

Tabla de contenido