Removing The Machine From The Tractor - Textron Jacobsen RANSOMES LH Serie Manual De Seguridad Y Operacion

Fig. 5
GB-FR-NL-26
All manuals and user guides at all-guides.com
GB
REMOVING THE MACHINE FROM
THE TRACTOR
Read the safety instructions
To remove the machine from the tractor, reverse the
attachment instructions.
IMPORTANT
(Fig. 5)
1. The stabilising pin (A) must be replaced over the
rear unit trailing arm (B) before the machine is
removed from the tractor 3-point linkage; this
ensures that the machine is stable when
removed from the tractor.
2 The stabilising pin MUST always be removed
from over the rear unit trailing arm for all
mowing and transporting operations.
NOTE: Stow the pump gearbox and valve assembly in
position on the hook provided beneath the top link
hitch point; this will prevent leakage from the gearbox,
which may occur if it is laid on the ground.
REMEMBER: It is not necessary at anytime when
assembling or removing the mower from the tractor to
dismantle, or disturb, any hydraulic pipe joints or
components. should servicing be necessary during
use, it must be carried out by a trained service person.