Specifications - Sony SA-PSD5 Manual De Instrucciones

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 3 ohm loads, both channels
driven, from 120 – 10,000 Hz; rated 25
watts per channel minimum RMS
power, with no more than 10 % total
harmonic distortion from 250
milliwatts to rated output.
SA-WPSD5 (subwoofer)
Max. output
Subwoofer: 80 W (4 ohms)
Front: 40 W + 40 W (6 ohms)
Center*: 40 W
Rear*: 40 W + 40 W
* Depending on the sound field settings and the source, there may be
no sound output.
Speaker system Bass reflex
Speaker unit
200 mm (7
Rated impedance
4 ohms
Dimensions (approx.)
300 × 300 × 300 mm
× 11
7
(11 /
8
not including the projecting parts)
Mass (approx.)
9.7 kg (21 lb 6 oz )
SS-SPSD5 (satellite speakers)
Speaker system Bass reflex
Speaker unit
77 mm (3
Rated impedance
6 ohms
Dimensions (approx.)
110 × 115 × 110 mm
× 4
3
(4 /
8
Mass (approx.) 780 g (1 lb 12 oz)
7
/ inches) dia. cone type
8
× 11
7 7
/ / inches) (w/h/d,
8 8
1
/ inches ) dia. cone type
8
× 4
5 3
/ / inches) (w/h/d)
8 8
General
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
95 W
3.5 W (standby mode)
Operating temperature
5˚C to 35˚C (41˚F to 95˚F)
Operating humidity
5 % to 90 %
Supplied accessories
See page 4.
Design and specifications are subject to change without
notice.
17 GB