Original Operating Manual 1 Symbols; Machine Features; Intended Use; Technical Data - Festool CARVEX PSC 420 EB Manual De Instrucciones

C A R V E X
GB
Original operating manual
1 Symbols ................................................ 14
2 Machine features .................................. 14
3 Intended use ......................................... 14
4 Technical data....................................... 14
5 Safety instructions................................ 15
6 Operation .............................................. 16
7 Settings................................................. 17
8 Working with the machine.................... 18
9 Service and maintenance ..................... 19
10 Accessories........................................... 20
11 Transport .............................................. 21
12 Environment ......................................... 21
13 EU Declaration of Conformity .............. 21
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
4

Technical data

Cordless jigsaws
Motor voltage
Stroke speed
Stroke length
Pendulum stroke
max. inclination (only with accessory angle
table WT-PS 400)
max. cutting depth (depending on saw blade)
Weight without battery pack
Safety class
14
2
[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
[1-6]
[1-7]
[1-8]
[1-9]
[1-10] Replaceable saw table
[1-11] Pendulum stroke switch
[1-12] Base runner
The illustrations specified are located at the begin-
ning and end of the operating manual.
3
Jigsaws are designed for sawing wood and similar
materials similar to wood. With the special saw
blades offered by Festool, these machines can also
be used for sawing plastic, steel, aluminium, non-
ferrous metal and ceramic plates.
The charger TRC 3 is designed for charging the bat-
tery packs listed.
PSC 420 EB
1500 - 3800 rpm
Wood
Aluminium
Steel
Wear protective gloves.
Do not throw in the household waste.

Machine features

Chip guard
On/Off switch
Variable speed trigger (only PSBC 420 EB)
Switch lock (only PSBC 420 EB)
Adjusting wheel for stroke speed control
Buttons for releasing the battery pack
Extractor connector
Saw table change lever
Saw blade ejection

Intended use

The user is liable for improper or non-in-
tended use.
PSBC 420 EB
10,8 - 18 V
1000 - 3800 rpm
26 mm
4 steps
45° to both sides
120 mm
20 mm
10 mm
1,8 kg
/II