Original Operating Manual 1 Symbols - Festool HKC 55 EB Manual De Instrucciones

HKC 55 EB
GB
Original operating manual
1 Symbols................................................ 16
2 Safety instructions ............................... 17
2.1 General safety instructions ................. 17
2.2 Additional safety instructions for cir-
cular saws............................................ 17
2.3 Residual risks ...................................... 18
2.4 Aluminium processing......................... 18
2.5 Emission levels .................................... 19
3 Intended use ........................................ 19
4 Technical data ...................................... 19
5 Machine features ................................. 19
6 Commissioning .................................... 20
6.1 Changing the battery pack................... 20
6.2 Capacity display ................................... 20
7 Settings ................................................ 20
7.1 Electronics ........................................... 20
7.2 Adjusting the cutting depth ................. 20
7.3 Adjusting the cutting angle.................. 20
7.4 Adjust pendulum guard ....................... 20
7.5 Changing the saw blade....................... 20
7.6 Dust extraction..................................... 21
8 Working with the electric power tool... 21
8.1 Switch on/off ........................................ 21
8.2 Acoustic warning signal....................... 21
8.3 Sawing along the scribe mark............. 21
8.4 Cutting sections ................................... 21
8.5 Sawing cut-outs (plunge cuts)............. 22
9 Service and maintenance .................... 22
10 Accessories .......................................... 22
10.1 Saw blades, other accessories ............ 22
10.2 Guide rail.............................................. 22
10.3 Cross cutting guide rail........................ 23
11 Environment......................................... 23
The illustrations specified are located at the begin-
ning and end of the operating manual.
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
16
Symbol Significance
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of as domestic waste.
Direction of rotation of saw and the saw
blade
Saw blade dimensions
a
a ... Diameter
b
b ... Locating bore
Tip or advice
Handling instruction
Inserting the battery pack.
Removing the battery pack.
Risk of pinching fingers and hands!
Hazardous area! Keep hands away!
Danger of injury by free-moving saw
blade
Circular saw with unprotected saw blade,
do not lay down
pendulum guard open
pendulum guard closed
Parking position
Lay down circular saw with closed pendu-
lum guard only