Descargar Imprimir esta página

A451 Anti-Mineral-Pad; About The A451 Anti-Mineral-Pad; Consumables - Boneco S450 Instrucciones De Uso

Ocultar thumbs Ver también para S450:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
34

A451 ANTI-MINERAL-PAD

en

ABOUT THE A451 ANTI-MINERAL-PAD

The A451 Anti-Mineral-Pad absorbs most of the cal-
cium during operation. It minimizes the excess lim-
escale build-up in the evaporator basin and reduces
the frequency of the need for descaling.
Once the A451 Anti-Mineral-Pad is completely filled
with calcium, it must be replaced. You can recognize
a full pad by its solid feel. Depending on the degree
of water hardness, replacement can be necessary
every two to four weeks. The A451 Anti-Mineral-Pad
can be disposed of with household waste.
There may be boiling water in the evaporator
basin! Remove the pad only after the water
has cooled.
Put only one pad into the evaporator basin.
A451 ANTI-MINERAL-PAD
1. Remove the appliance cover.
2. Remove the water tank.
3. Remove the steam tube.
4. Replace the used A451 Anti-Mineral-Pad.
5. Put the appliance back together by following the
steps in reverse order.

CONSUMABLES

You can obtain a replacement for the used A451 An-
ti-Mineral-Pad from your BONECO specialist dealer
or the BONECO online store:
shop.boneco.com

Publicidad

loading