Accidental Operation Prevention Function (Hold Mode) - JVC XL-PG31 Instrucciones De Funcionamiento

HOLD
Downloaded From DvDPlayer-Manual.com JVC Manuals
HOLD
a
Accidental Operation
Prevention Function
(Hold Mode)
This function causes the unit to ignore short, accidental
button presses.
The accidental operation prevention function
prevents the following:
• Powering on the unit accidentally (which can cause the
batteries to go dead).
• Play being cut off unexpectedly in the middle of a track.
But the unit and wired remote control have HOLD
switches, each of which works independently.
To use the accidental operation prevention
function
• To prevent the unit from powering up accidentally, set
the HOLD switch to the HOLD position.
• To prevent the unit from unexpected operation during
play, set the HOLD switch to the HOLD position after
playing the disc.
a HOLD mode
" "
When the unit is in the hold mode according to the HOLD
switch setting in the main unit, "
To release the function
Move the HOLD switch back to its original position.
Note:
If the HOLD switch is set to the HOLD position, you can-
not turn on the unit.
" lights up.