Accidental Operation Prevention Function (Hold Mode) - JVC XL-PG37SL Instrucciones De Funcionamiento

HOLD
OFF ON
XL-PG57SL only
Sólo XL-PG57SL
Alleen bij de XL-PG57SL
HOLD mode
Función de bloqueo
HOLD vergrendelfunctie
10
DC IN
4.5V
HOLD
Accidental Operation
Prevention Function
(Hold Mode)
This function causes the unit to ignore short, accidental
button presses.
The accidental operation prevention function
prevents the following:
• Powering on the unit accidentally (which can cause the
batteries to go dead).
• Play being cut off unexpectedly in the middle of a track.
But the unit and wired remote control have HOLD
switches, each of which works independently.
To use the accidental operation prevention
function
• To prevent the unit from powering up accidentally, set
the HOLD switch to the ON position.
• To prevent the unit from unexpected operation during
play, set the HOLD switch to the ON position after you
starts playing the disc.
" "
When the unit is in the hold mode according to the HOLD
switch setting in the main unit, "
button is pressed.
To release the function
Move the HOLD switch back to the OFF position.
Note:
If the HOLD switch is set to the ON position, you cannot
turn on the unit. However, you can operate the unit us-
ing the remote control. (XL-PG57SL only)
" lights up if the 6