Preventing Accidental Operation (Hold) - JVC XL-PM30SL Instrucciones De Funcionamiento

Lector portátil de discos compactos
Tabla de contenido

Publicidad

HOLD
OFF
ON
HOLD
9
Preventing Acci-
dental Operation
(HOLD)
The HOLD switch on the unit/remote control is prepared
to prevent an accidental operation by an unexpected but-
ton press.
Setting the HOLD switch ON prevents the fol-
lowing:
• Powering on the unit accidentally (which can cause the
batteries to go dead).
• Play being cut off unexpectedly.
• Unexpected operation during play. (Set the HOLD
switch to the ON position after you start playing disc.)
To set the unit/remote control in HOLD mode
• Set the HOLD switch on the unit/remote control to the
ON position. The all buttons on the unit/remote control
are disabled.
"HOLD " indication
When the unit is in HOLD mode, "HOLD" will be displayed
if a button on the unit is pressed.
To release the HOLD mode
Set the HOLD switch to OFF position.
Notes:
• Before turning on the unit, be sure that HOLD is OFF.
Otherwise, you cannot turn on the unit.
• The HOLD switch on the unit is effective for the unit
only. While, that on the remote control is effective for
the remote control only.

Publicidad

Tabla de contenido
loading

Tabla de contenido