Moving Forward; Motorcompressor Forward Moving; Stopping The Motorcompressor; Adjustment - CAMPAGNOLA MC550 Manual De Uso Y Mantenimiento

4 - USING THE MOTORCOMPRESSOR

4.5 Moving forward

WARNING!
When the motorcompressor works, it shall be placed on flat ground. 20% is the max. gradient allowed when moving
it uphill, downhill or across the hill side (see picture F). Higher gradients may cause the engine and the
motorcompressor to break.

4.5.1 Motorcompressor forward moving

• By operating lever (4) the motorcompressor will move forward. Its speed is controlled by the operator.
• The motorcompressor movement is stopped by releasing the lever (4).
• The motorcompressors are fitted with a two-wheel drive with differentiated effect.
WARNING!
When moving the motorcompressor, the operator shall hold it by the handle bars constantly, as it has no brakes.

4.6 Stopping the motorcompressor

For the petrol/gasoline version only
• Move the switch (16) to the OFF position.
• Close the cock (8) on the fuel tank.
For the diesel version only
• Move the switch lever (44) to the left.

4.7 Adjustment

Air pressure adjustment
To change the air pressure, pull the knob (25) on the regulator. Turn it clockwise to increase the pressure; counter-clockwise to
decrease it. When the desidered pressure has been reached, lock the knob pulling it slightly downwards.
Air lubricator adjustment
A drop of oil every 20-30 seconds should fall from the nozzle inside the transparent cap (24). To adjust the rate at which the oil
should drop, turn the screw located on the cap (24). By using a screwdriver, turn it counter-clockwise to increase; clockwise to
decrease. Meanwhile, idle a tool.
25 - 72