Operator Settings Folder - Ingersoll Rand R37-160 Información Del Producto

60313.16.03
Page 2: Counters
• Hour Meters indicate the hours that: the controller has been powered up,
and the compressor has been running.
• Starts indicate the number of times a start is attempted on the
compressor.
Date & Time is adjustable and configurable in the GENERAL SETTINGS
•
folder.
All information on this page is read only .
Pages 3-5: Analog Inputs & Compressor Information
Figure 60: Analog Inputs & Compressor Information
All information on these pages is read only .
The following analog inputs are displayed in this section:
• Package Discharge Pressure
• Sump Pressure
• Airend Discharge Temperature
• Injected Coolant Temperature
• Aftercooler Discharge Temperature
• Separator Pressure Drop
• Coolant Filter Pressure Drop
• Inlet Vacuum
• Remote Pressure (optional)
• Aftercooler Discharge Pressure (integrated dryer compressors only)
EN-
All manuals and user guides at all-guides.com
Figure 59: Counters
NOTICE
Icon Meaning
Pressure
Temperature
NOTICE
Additionally, the following compressor status readings are included in this
section:
• Motor Speed
• Package kW
• Average Package kW/hour
• Average % Capacity
• Average Capacity
• Energy Cost
• Energy Savings
• Lifetime Energy Savings

Operator settings folder


Pages 1-2: Operator Settings
Figure 61: Operator Settings
The parameters below are adjustable at any time:
Table 22: Operator Settings
Operator Default
Settings
Target Pressure 100
Automatic Stop 110 Target+1
Pressure
Immediate Stop 120
Pressure
% Savings Modulation
Compared To
Energy Rate 0.000
Reset Averaging --/--/--
EN
Min . Max . Step Unit
65 145 1 psi
Target+10 1 psi
Auto Auto+10 1 psi
--- --- --- ---
0.000 9999.999 --- ---
- - - date
80446339 Rev C