Emerson MIDWAY ECO LED Manual Del Propietário página 14

5. How to Wire Your Ceiling Fan
5.3
Securely connect the fan black wire to the supply black
(hot) wire using wire connector (supplied) (Figure 22).
5.4
After connections have been made, turn leads upward
and carefully push leads into the outlet box, with the white
and green leads on one side of the outlet box and position
the black leads on the other side of the outlet box
(Figure 23).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.5
Screw the two threaded studs (supplied) into the tapped
holes in the hanger bracket (Figure 24).
Your fan is now wired to be turned on and off from the fan
switch.
All manuals and user guides at all-guides.com
14
(Continued)
Figure 22
GREEN
WIRES
WHITE WIRES
Figure 23
THREADED
STUDS (2)
Figure 24
SUPPLY BLACK
(HOT)
LISTED WIRE
CONNECTOR
FAN BLACK WIRE
BLACK WIRES
ETL Model No.: CF955L