Sportplus SP-HT-9910-B-iE Instrucciones De Uso página 41

• This product is not intended to be used by persons (including children) with reduced
physical, sensory or mental abilities or lack of experience and/or lack of knowledge
unless they are supervised by a person responsible for their safety or have received
instructions on how to use the product.
• Do not pull the cord when disconnecting the power adapter from the wall socket
and do not wind the power cable around the product.
• Connect the power adapter to a readily accessible wall socket in order to be able to
disconnect the product from the power supply immediately in case of emergency.
Disconnect the power adapter from the wall socket to fully switch off the product.
Use the power adapter as disconnecting device.
• Disconnect the adapter before each cleaning and if not using the product for a
longer period of time.
• Only use the power adapter provided for this product.
INFORMATION ON ASSEMBLY (GENERAL)
• The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
• Check the components against delivery to make sure all are present. Do not
dispose of all packaging materials until assembly is completed.
• Please note that there is always a risk of injury when using tools to carry out
manual tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave any
tools lying around. Place the packaging materials somewhere where they will
not pose any hazards during assembly. Packaging foil or plastic bags pose a
suffocation hazard for children!
• After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will not
leave marks behind.
Caution, risk of crushing! Moving parts may crush, pinch, or cut body parts.
Do not touch moving parts while using the product!
• Make sure that all screws and bolts are securely tightened before using the product.
SP-HT-9910-B-W-iE-IM-V04.indb 41 SP-HT-9910-B-W-iE-IM-V04.indb 41
41
20/09/2021 6:52:55 pm 20/09/2021 6:52:55 pm