Haier HRF-370IT Instrucciones De Uso página 33

English
Each time button D is pressed the setting will increase by
1 digit. If no operation for 5 seconds, the clock setting will
be confirmed and indicator N will light up. The ambient
temperature and time displays are not switched on. The
set alarm clock time counts down by 1 digit to "00:00".
The alarm will sound for 20 seconds and the previous
operation mode (time or ambient temperature) will be
displayed when the set alarm time ends. If buttons A and
D are pressed and held again, the set alarm clock time
will be reset and indicator N turn off. The setting range is
the same as the display range. The alarm can be silen-
ced by pressing B and C simultaneously
13. Over temperature alarm
The refrigerator will alarm in case:
1) Fridge or freezer door is not properly closed
2) Fridge or freezer is excessively over the set tempe-
rature.
3) System is running abnormally.
Indicator M will light up and the temperature indicator
"°C" in displays E or F will blink. To silence the alarm,
press buttons B and C simultaneously. Indicator M will
turn off automatically when the set temperature value is
restored. If indicator M remains alight, contact the after
sales service agent.
14. Self-check function
If one of the four refrigerator sensors does not work pro-
perly, indicator E, F or G will display F1, F2, F3 or F4
accordingly to the sensor malfunction. Although the refri-
gerator will continue to operate, it is strongly recommen-
ded to contact the after sales service agent for technical
assistance.
15. Power interruption memory
The current operating mode of the refrigerator and the
selected period of super cooling and freezing will be
resumed if the power supply is interrupted and then
restored.
16. Time delay protection
The refrigerator can only restart 8 minutes after each
stop so as to protect the compressor.
17. Beep sound
Each time a button is pressed (correct operation only) a
beep sound is generated.
18. Energy saving mode
HRF370AA - HRF370AAA
HRF470AA - HRF470AAA
Press buttons A and C together to enable energy saving
mode (fan off): the indicator J will display. To disable the
mode and turn the fan back on, press buttons A and C
All manuals and user guides at all-guides.com
- 15 -
together again; the indicator J will disappear from the
display.
During normal operation of the refrigerator compart-
ment, the indicator J displays intermittently; pressing
buttons A and C together switches off the fan and J dis-
plays steadily. Press buttons A and C together to turn
the fan back on again during normal operation: the indi-
cator J returns to intermittent display.
N.B.: we recommend switching the fan on when the
ambient temperature is greater than 25°C.