Publicidad
Step 17
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D12 and D13).
å
Fasten the DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D12)
å
and the DRAWER LEFT (35AD) to the LEFT DRAWER SIDE (D13). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
NOTE: The glides are not intended to rotate.
å
Fasten two KNOB SETS (157K) to the DRAWER FRONT (L). Use two
å
GOLD 1" MACHINE SCREWS (50S).
2
157K
Glide end
1
D13
L
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
10A
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D12
3S
Almost time to
celebrate! With a nap.
50S
GOLD 1" MACHINE SCREW
(2 used for the KNOB SETS)
10A
Glide end
1
2
Page 21
Publicidad
