Heat Hazard; Mechanical Hazard - HP Latex R Printer Serie Manual De Instrucciones

Take special care with zones marked with warning labels.
●
Do not place objects covering the LED array supports, beam, or enclosures.
●
Take care not to spill liquid on the accessory. After cleaning, make sure all components are dry before
●
using the printer.
Do not attempt to modify the LED array supports, beam, or enclosures.
●

Heat hazard

The drying and curing subsystems of the printer operate at high temperatures and can cause burns if touched. LED
array (optional) supports, beam, and enclosures can reach high temperatures. To avoid the risk of burns, take the
following precautions:
Do not touch the internal enclosures of the printer's drying and curing modules, nor the vapor removal
●
thermal blankets.
Take special care when accessing the substrate path.
●
Take special care with zones marked with warning labels.
●
Do not place objects covering the LED array supports, beam, or enclosures.
●
Do not attempt to modify the LED array supports, beam, or enclosures.
●
Remember to let the printer cool down before performing some maintenance operations.
●

Mechanical hazard

The printer has moving parts that could cause injury. To avoid personal injury, take the following precautions when
working close to the printer and in-line slitters:
Keep your clothing and all parts of your body away from the printer's moving parts.
●
Avoid wearing necklaces, bracelets, and other hanging objects.
●
If your hair is long, try to secure it so that it will not fall into the printer.
●
Take care that sleeves or gloves do not get caught in the printer's moving parts.
●
Avoid standing close to the fans, which could cause injury and could also affect print quality (by obstructing
●
the air flow).
Do not touch gears or moving rolls during printing.
●
Do not operate the printer with covers bypassed.
●
Do not touch alignment or lateral bars during printing.
●
Use personal protective equipment to manipulate rigid substrates.
●
WARNING!
bar, drying beam, or curing modules after giving the command to print. Those parts may move and adjust
automatically and can cause you serious injuries.
For Roll Printing Kit accessory: Take care when using the air gun. When used for cleaning purposes, make
●
sure to use it according to local regulations: additional safety provisions may apply.
Ensure that the tables are properly latched to the printer before using them. Before unlatching the table
●
always clear it, remove and store both drop-in rollers in position before folding the table.
4
Take care when loading or collecting substrate, and never put your hands below the alignment
ENWW