Safety Instructions And Warnings; Use According To The Intended Purpose - Kübler CODIX 550 Manual Del Usuario

1. Safety instructions and warnings

Only use this display
– in a way according to its intended purpose
!
– if its technical condition is perfect
– adhering to the operating
instructions and the general
safety instructions.
1. Before carrying out any installation or mainte-
nance work, make sure that the power supply
of the digital display is switched off.
2. Only use this digital display in a way accord-
ing to its intended purpose.
3. If its technical condition is perfect.
4. Adhering to the operating instructions and the
general safety instructions.
5. Adhere to country or user specific regulations.

1.1 Use according to the intended purpose

The digital display may be used only as a panel-
mounted device. Applications of this product
may be found in industrial processes and con-
trols, in manufacturing lines for the metal, wood,
plastics, paper, glass, textile and other process-
ing industries.
Over-voltages at the terminals of the digital dis-
play must be kept within the limits in Category II
4
6. The digital display is not intended for use in
areas with risks of explosion and in the
branches excluded by the standard EN 61010
Part 1.
7. The digital display shall only operated if it has
been correctly mounted in a panel, in accor-
dance with the chapter "Main technical fea-
tures".
If the digital display is used to monitor
machines or processes in which, in case of a
failure of the device or an error made by the op-
erator, there might be risks of
damaging the machine or causing accidents to
the operators, it is your
responsibility to take appropriate safety meas-
ures.
www.kuebler.com