Mains Hum Filter; Interface; Baud Rate - Kübler CODIX 550 Manual Del Usuario

5.4.3 Effects resulting from exceeding the measuring range limits or of
Overload/Underload on MIN/MAX.
If the signal measured lies outside the measuring
range limits
rent measured value will be recorded either as a
MIN value or as a MAX value
the signal is in an overload or underload condi-
tion, then it will be saved either as as a MIN

5.5 Mains Hum Filter

To reduce the interference from mains line and the environment (mains hum), the instrument must
be set to the local mains frequency.
Menu <–> Selection
press the key to accept

5.6 Interface

As an option the instrument can be supplied
with a serial interface, either RS232, RS485 or
RS422. Using a PC, then all the unit's parame-
ters can be read or programmed via this inter-
face.
5.6.1 Select Baud Rate
Menu <–> Selection
press the key to accept
16
or then the cur-
Local power line 60 Hz
Local power line 50 Hz
Example: 600 Baud
600 Baud
1200 Baud,
2400 Baud, 4800 Baud, 9600 Baud
19200 Baud
value
. If
A more detailed description of the commands
can be found in the separate instruction manual
"CODIX 55x Interfaces". This manual is supplied
with units having an interface. When the unit is
powered up, then the type of interface will ap-
pear in the display for approx. 2 sec.
or as a MAX value
www.kuebler.com
. .