Display Hold - Kübler CODIX 550 Manual Del Usuario

6.2 Resetting MIN/MAX value
Resetting is only possible if this has been en-
abled in the parameter mode.

6.3 Display Hold

The Display Hold function is only available for
use with the current measured value and for the
totalizer value.
For as long as a high level signal
( > 4 V DC ) is present at the MP input, then the
display is "frozen".
20
Select Min/Max value display
• press the red key.
• the stored value is cleared
The MIN/MAX capture, alarm monitoring and to-
talizer functions continue in the background.
www.kuebler.com