Installation And Set-Up - Glatz Suncomfort Push Up Manual De Instrucciones

Installation and set-up

2.1 2.2 2.3
1
Unpack the sunshade
Supplied with:
- Upper pole with sunshade canopy
- Lower pole
- Sunshade top
- Operating instructions
!
Please dispose of the packing ma-
terial appropriately and keep away
from children. Do not make use of
defective material. In the event of
any damage, inform the transport
service provider immediately.
2
Put the sunshade together
1. Loosen the clamping screw suffi-
ciently
2. Push the lower pole into the upper
pole
3. Tighten the clamping screw
4. Check that it is firmly attached
!
In order to avoid damages, do not
over-tighten the clamping screw.
36 37
3.1
3
Place sunshade in base
Set up base on even and stable sur-
face. Minimal base weight: 40 kg
1. Place sunshade in base
2. Tighten the base tube clamp
i
Suitable floor mounts are available
3.2
from your SUNCOMFORT/GLATZ
dealer.