C
D
/T
URRENT
AY
IME
NOTE: This setting may only be made with the base.
Time is transmitted automatically by your local phone company as part of
Caller ID service. If you are subscribed to Caller ID service, the current time is
set automatically when you receive your first CID call. Otherwise, you can set
the time manually.
1. Press the flash/program button until SET DAY shows in the display.
Monday is the default setting.
2. Use the MESSAGES/CID (
3. Press flash/program until SET TIME shows on the display. 12:00 AM is
the default setting.
4. Use the touch-tone pad to enter the first digit of the hour, then enter the
second digit of the hour, the first digit of the minute, and the second
digit of the minute.
5. Use the MESSAGES/CID (
6. Press flash/program again to store your selection.
NOTE: Press and release flash/program to review the settings. To exit, press
the flash/program button until you exit the menu.
T
/P
ONE
ULSE
NOTE: This setting may only be made with the base.
1. Press the flash/program button until 1TONE 2PULSE shows in the
display. 1 TONE is the default setting.
2. Use the touch-tone pad on the base to enter your selection, or press the
MESSAGES/CID (
or
3. Press flash/program again to store your selection.
R
S
ING
ELECT
This setting may only be made with the base.
1. Press the flash/program button until RING SELECT shows in the display.
All manuals and user guides at all-guides.com
or
) button to select the current day.
or
) button to scroll to AM or PM.
) buttons to scroll to your selection.
13