Dialing A Caller Id Number - GE 27958 Guia Del Usuario

2. Press the memory (base) memory (cordless handset) button.
3. Press the desired memory location. Example, press the number 1 key to
store the record in memory location 1. You will hear a confirmation tone.
D C ID N
IALING A ALLER
When reviewing any call record in the Caller ID memory, you can dial back
the caller's number.
1. Make sure the phone is OFF (not in talk mode).
2. Press MESSAGES/CID (
(cordless handset) until the desired call record is displayed.
Depending on (a) how the incoming caller's phone number is formatted
when received, and (b) whether or not you pre-programmed your local
area code into memory, you may need to adjust the format of the
caller's phone number before dialing it back.
The format button lets you change the format of the displayed number.
Available formats include:
Number of digits
Eleven digits long distance code "1"
+ 3-digit area code
+ 7-digit telephone number.
Ten digits 3-digit area code +
7-digit telephone number.
Seven digits 7-digit telephone number.
NOTE: If the phone company does not supply all ten digits of an incoming
caller's number, you will not be allowed to adjust the format of that number.
Scroll to the number you want to call back:
3. If using the base or handset: press the MESSAGES/CID (
(base) or cid/vol ( or
All manuals and user guides at all-guides.com
UMBER
or ) button (base) or cid/vol (
Explanation
) button (cordless handset).
or ) button
Example
1-317-888-8888
317-888-8888
888-8888
or ) button
29