Registration; Default Setting - GE 27958 Guia Del Usuario

2. Use the touch-tone pad on the base to enter your selection, or use the
MESSAGES/CID ( or
3. Press flash/program again to store your selection.
R
EGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base's phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the flash/program button on the base until LINK HANDSET shows
in the display. 2NO is the default setting.
2. Press the 1 number key or press the MESSAGES/CID (
on the base to scroll to 1YES .
3. Press flash/program to confirm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the flash/program button on the handset until LINK BASE? shows
in the display. 2NO is the default setting.
5. Press 1 on the handset keypad or cid/vol (
handset to scroll to 1YES .
6. Press flash/program on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
D S
EFAULT ETTING
1. Press the flash/program button until DEFAULT SETTING 1YES 2NO
shows in the display. 2NO is the default setting.
2. Press 1 or 2 on the cordless handset or base touch-tone pad or use the
MESSAGES/CID ( or
button on the handset to scroll to 1YES or 2NO .
NOTE: If you choose "YES" all settings in the programmable menu return to
factory defaults. Changing the default setting will not reset the clock.
3. Press flash/program again to store your selection.
14
All manuals and user guides at all-guides.com
) button to scroll to your selection (3 to 5 rings).
or
) button on the base or the cid/vol (
or ) button
) button on the
or )