Greenlee 93-804 Instructivo De Operacion, Servicio Y Piezas página 6

Operation
AC Current Measurement
1. Set the Range Selector Switch to the
proper range (20, 200 or 600 ACA).
Note: If measuring an unknown current,
start at the highest range, then
adjust to the proper lower range
for best resolution.
2. Press the trigger to open the jaws.
Clamp around one conductor only.
Make sure that the jaws are firmly
closed around the conductor.
3. Read the value on the digital display.
Press DATA HOLD to hold displayed
value. Press again to release.
6
All manuals and user guides at all-guides.com
Electrical Shock Hazard.
Contact with live circuits will result in severe injury
or death.
Fig. 2