Pioneer FH-P4000R Manual Del Usuario página 32

Section
Multi-CD Player
08
2 Use
VOLUME
When you press
raised and when pressed down/–, the volume is
lowered.
3 Select a disc you want to listen to with the
to buttons.
1 6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as for disc 7, until the disc number
1
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine,
NO DISC
32 En
All manuals and user guides at all-guides.com
to adjust the sound level.
up/+, the volume is
VOLUME
is displayed.
READY
CD ERR-14
is displayed.
may