Output Display; Transducer Surface Temperature Rise; Acoustic Output Tables - FujiFilm SonoSite Edge II Guia Del Usuario

Output display

Table 8: TI or MI ≥ 1.0
Transducer
C8x
C35x
HFL38xi standard/
armored
L25x standard/
armored
Even when MI is less than 1.0, the system provides a continuous real-time display of MI in all imaging modes, in
increments of 0.1.
The system meets the output display standard for TI and provides a continuous real-time display of TI in all imaging
modes, in increments of 0.1.
The TI consists of three user-selectable indices, and only one of these is displayed at any one time. In order to
display TI properly and meet the ALARA principle, the user selects an appropriate TI based on the specific exam
being performed. FUJIFILM SonoSite provides a copy of AIUM Medical Ultrasound Safety, which contains guidance
on determining which TI is appropriate.

Transducer surface temperature rise

Table 9: Transducer Surface Temperature Rise, External Use (°C)
Test
Still air
Simulated use

Acoustic output tables

Note
10
Index
MI
TIC, TIB, or TIS
MI
TIC, TIB, or TIS
MI
TIC, TIB, or TIS
MI
TIC, TIB, or TIS
C8x C35x
11.3 15.3
5.5 8.5
For acoustic output information on the HFL38xi and L25x armored transducers,
see the HFL38xi and L25x acoustic output tables in the ultrasound system user
guide. The acoustic output tables for the HFL38xi exam are listed here.
2D/ CPD/
M Mode Color
Yes Yes
No No
Yes No
No No
Yes Yes
No No
Yes Yes
No No
HFL38xi standard/armored
12.4
7.7
PW CW
Doppler Doppler
Yes —
Yes —
No —
Yes —
Yes —
Yes —
No —
Yes —
L25x standard/armored
16.1
8.5
Acoustic output