Adjusting Equalizer Curves; Fine-Adjusting Equalizer Curve; Adjusting Loudness - Pioneer DEH-P4950MP Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Audio Adjustments
! CUSTOM is an adjusted equalizer curve
that you create. If you make adjustments to
an equalizer curve, the equalizer curve set-
ting will be memorized in CUSTOM.
! When EQ FLAT is selected no supplement
or correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
EQ FLAT and a set equalizer curve.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL—NATURAL—VOCAL—CUSTOM
—EQ FLAT—SPR-BASS

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
1
Press AUDIO to select EQ.
2
Press c or d to select the equalizer
band to adjust.
EQ-L (low)—EQ-M (mid)—EQ-H (high)
3
Press a or b to adjust the level of the
equalizer band.
+6 to –6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Note
If you make adjustments, CUSTOM curve is up-
dated.
All manuals and user guides at all-guides.com

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (EQ-L/EQ-M/EQ-H).
1
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2
justment from among low, mid and high.
Press AUDIO repeatedly to switch between
the following functions:
Low—Mid—High
3
quency.
Low: 40—80—100—160 (Hz)
Mid: 200—500—1k—2k (Hz)
High: 3k—8k—10k—12k (Hz)
4
tor.
2N—1N—1W—2W
If you make adjustments, CUSTOM curve is up-
dated.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Black plate (29,1)
Level (dB)
Q=2N
Center frequency
Press AUDIO and hold until frequency
Press AUDIO to select the band for ad-
Press c or d to select the desired fre-
Press a or b to select the desired Q fac-
Note
Press AUDIO to select LOUD.
<YRD5114-A/U>29
Section
08
Q=2W
Frequency (Hz)
29
En

Publicidad

Tabla de contenido
loading

Tabla de contenido