Switching The Auxiliary Setting; Setting The Rear Output And Subwoofer Controller; Turning The Clock Display On Or Off - Pioneer DEH-P4950MP Manual De Operación

Other Functions
2 Press c or d to select the AM tuning
step.
Press c to select 9 (9 kHz). Press d to select
10 (10 kHz).

Switching the auxiliary setting

Auxiliary equipments connected to this unit
can be activated individually. Set each AUX
source to ON when using. About connecting
or using auxiliary equipments, refer to Using
the AUX source on the next page.
1 Press FUNCTION to select AUX1/AUX2.
2 Press a or b to turn AUX1/AUX2 on or
off.
Setting the rear output and
subwoofer controller
This unit's rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (R-SP :FUL) or subwoofer
(R-SP :S/W) connection. If you switch the rear
output setting to R-SP :S/W, you can connect
a rear speaker lead directly to a subwoofer
without using an auxiliary amp.
1 Press FUNCTION to select R-SP.
2 Press a or b to switch the rear output
setting.
Pressing a or b will switch between
R-SP :FUL (full-range speaker) and R-SP :S/W
(subwoofer) and that status will be displayed.
# When no subwoofer is connected to the rear
output, select R-SP :FUL.
# When a subwoofer is connected to the rear
output, set for subwoofer R-SP :S/W.
All manuals and user guides at all-guides.com
# When the rear output setting is R-SP :S/W,
you cannot change the subwoofer controller.
! Even if you change this setting, there is no
! If you change this setting, subwoofer output
! Both rear speaker leads outputs and RCA rear
Turning the clock display
on or off
You can turn the clock display on or off.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Even when the sources are off, the clock display
appears on the display. Pressing CLOCK turns
the clock display on or off.
Black plate (33,1)
Notes
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
30).
in the audio menu return to the factory set-
tings.
output are switched simultaneously in this
setting.
Note
<YRD5114-A/U>33
Section
09
33
En