Boosting The Bass; Front Image Enhancer (F.i.e.); Adjusting Source Levels - Pioneer DEH-P4950MP Manual De Operación

Audio Adjustments

Boosting the bass

Bass boost function boosts the bass level of
sound lower than 100 Hz. The more the bass
level is increased, the more the bass sound is
emphasized and the entire sound becomes
powerful. When using this function with the
subwoofer, the sound under the cut-off fre-
quency is boosted.
1 Press AUDIO to select BASS.
2 Press a or b to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.

Front image enhancer (F.I.E.)

The F.I.E. (Front Image Enhancer) function is a
simple method of enhancing front imaging by
cutting mid- and high-range frequency output
from the rear speakers, limiting their output to
low-range frequencies. You can select the fre-
quency you want to cut.
Precaution
When the F.I.E. function is deactivated, the rear
speakers output sound of all frequencies, not just
bass sounds. Reduce the volume before disenga-
ging F.I.E. to prevent a sudden increase in vo-
lume.
1 Press AUDIO to select FIE.
# When the rear output setting is R-SP :S/W,
you cannot select FIE.
# When the HPF function is on, you cannot se-
lect FIE.
2 Press a to turn F.I.E. on.
# To turn F.I.E. off, press b.
All manuals and user guides at all-guides.com
3
quency.
100—160—250 (Hz)
! After turning the F.I.E. function on, use the bal-
! Turn the F.I.E. function off when using a 2-

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
1
with the level of the source you wish to ad-
just.
2
3
lume.
SLA : +4 to SLA : –4 is displayed as the source
volume is increased or decreased.
! The AM tuner volume level can also be ad-
! The built-in CD player and the multi-CD player
! External unit 1 and external unit 2 are set to
Black plate (31,1)
Press c or d to select a desired fre-
Notes
ance adjustment (refer to page 28) and adjust
front and rear speaker volume levels until they
are balanced.
speaker system.
level, which remains unchanged.
Compare the FM tuner volume level
Press AUDIO to select SLA.
Press a or b to adjust the source vo-
Notes
justed with source level adjustments.
are set to the same source level adjustment
volume automatically.
the same source level adjustment volume
automatically.
<YRD5114-A/U>31
Section
08
31
En