Fitting Instructions - bort medical 104 660 SP Instrucciones De Uso

Fitting instructions

1
Loosen the Velcro which fixes the thumb loop on the restraint and pull the loop
upwards to the rucksack buckle.
2
Open the chest strap using the Velcro fastener.
3
Guide the brace around the shoulders like a rucksack. Pull the brace over the
chest straps and close the Velcro below the chest.
4
Then, actively straighten your thoracic spine, guide your thumbs though the
thumb loops and release the Velcro by guiding the loops upwards. Following
this, pull the restraints downwards tightly and fix the strap on the course of the strap
using the Velcro.
Removal
Remove the thumb loop from the Velcro and guide it to the rucksack buckle, thus
loosening the restraint guidance. Open the chest strap and slip the corset off over
the back as for a rucksack.
Material composition
Polyamide (PA), polyester (PES), elastane (EL)
Cleaning information
Delicate wash 30°C
Do not iron
Information: Before cleaning, pay attention to remove the splints in the back plate
in order to avoid damages to the brace and your washing machine. Close the Velcro
fastening to avoid damage to other laundry items. Do not use fabric conditioner.
Stretch back into shape and dry in the fresh air.
Do not bleach
Do not clean chemically
Do not dry in a tumble dryer
EN
09